Home
Jaltest Telematics
WHERE TO BUY JALTEST?
DIAGNOSTICS
TELEMATICS
ISOBUS
OEM
MILITARY
UNIVERSITY
MY ACCOUNT
Cart
REQUEST INFORMATION
ACCESS TO FLEET
Online Catalog   ONLINE CATALOG

Coverage

FIND OUT ALL OUR COVERAGE
All coverage
What are you looking for?
TRUCK TRAILER BUS LIGHT COMMERCIAL VEHICLE MANUFACTURER
OHW - HEAVY EQUIPMENT OHW - COMPACT EQUIPMENT STATIONARY ENGINE MULTI-PURPOSE VEHICLE

/ AGV / TRACTOR / JOHN DEERE / 8R SERIES

Fault code reading
Fault code reading
It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time.
Measure Values
These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system.
ECU Data
Vehicle Technical Data
Vehicle Technical Data
Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained.
Vehicle maintenance
Diagnostics warning
Diagnostics warning
Additional actions
Additional actions

Fault code reading: Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading.

Measure Values: It displays on the screen the values of the different sensors connected to the ECU. It depends on each system.

ECU Data: These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system.

Vehicle Technical Data: Technical information of vehicles including all the engine technical data, tightening torques, capacities, graphics and other checking values…

Vehicle maintenance: Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained.

8R SERIES

General vehicle information: Technical information of vehicles including all the engine technical data, tightening torques, capacities, graphics and other checking values… Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained.
System Fault code reading Measure Values ECU Data Vehicle maintenance Diagnostics warning Additional actions
Antitheft EIC, Immobilizer Control Unit It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Central computer CAB, Cabin module It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Central computer CCU, Body computer It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Central computer FCC (MY 22), Control unit, front module It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Central computer FCC, Control unit, front module It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Climate HVAC ATC (MY22), Automatic Temperature Control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Climate HVAC ATC, Automatic Temperature Control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Electronic module ACU, Armrest control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Electronic module AIC (MY22), Armrest control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Electronic module AIC, Armrest control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Electronic module ASU, Management system of the suspension in the driver's seat It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Electronic module CLC, Cabin module It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Electronic module OIC, Control system for the vehicle configuration It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Electronic module VLC, Lighting, operator's controls It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Engine ECU HPCR (Level 21 - Interim Tier 4 / Stage III B), Electronic Diesel Control, Common Rail It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Engine ECU HPCR (Level 24 - Tier 2 / Stage II), Electronic Diesel Control, Common Rail It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Engine ECU HPCR (Level 25 - Tier 3 / Stage III), Electronic Diesel Control, Common Rail It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Engine ECU HPCR (Level 33 - Tier 4F/5 - Stage IV/V), Electronic Diesel Control, Common Rail It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Engine ECU HPCR (Level 40 - Tier 4F/5 - Stage IV/V), Electronic Diesel Control, Common Rail It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Engine ECU HPCR HP3 (Level 14 - Tier 3 / Stage III A) , Electronic Diesel Control, Common Rail It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Gearbox PTI (AutoPowr- IVT), Transmission It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Gearbox PTP (PowerShift e16), Transmission It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Gearbox PTP (PowerShift e23), Transmission It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Gearbox TII, Transmission regulation system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Gearbox TIP, Transmission regulation system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Hydraulic systems HCC, Hydraulic lift It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Hydraulic systems HV1, Hydraulic lift It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Hydraulic systems SCC, Control panel for spool valves It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Hydraulic systems SV1, Remote Hydraulic Controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Hydraulic systems SV2, Remote Hydraulic Controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Hydraulic systems SV3, Remote Hydraulic Controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Hydraulic systems SV4, Remote Hydraulic Controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Hydraulic systems SV5, Remote Hydraulic Controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Hydraulic systems SV6, Remote Hydraulic Controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Hydraulic systems SV7, Remote Hydraulic Controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Instrument cluster PDU, Instrument cluster - display It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Lighting RLC, Roof lights It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Power take-off RPT, Rear power take-off It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Steering SST, Steering controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Steering SSU, Steering controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Steering TMA, Steering controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Steering TMB, Steering controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Steering TSA , Steering controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Steering TSB, Steering controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Steering XMA, Auto-guidance system, GPS It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Steering XMB, Steering controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Steering XMC, Auto-guidance system, GPS It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Steering XSA, Steering controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Steering XSB, Steering controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Steering XSC, Auto-guidance system, steering controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Suspension SFA, Suspension management system in the front axle It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions

ARE YOU INTERESTED IN JALTEST DIAGNOSTICS?

CONTACT COJALI USA INC.
Cojali USA Inc.
2200 N.W. 102 Avenue, #4B
Doral, Florida 33172, USA

TECHNICAL SUPPORT TEAM
+1 305 960 7651
Call for free:
+1 800 975 1865
customersupport@jaltest.com
Facebook X Instagram YouTube Linkedin Threads
Cojali
   Copyright © 2024 Cojali S.L. All rights reserved
COJALI
COMPANY
This page uses our own and third-party cookies to improve the navigability and accessibility of our web site and to optimize the user experience. You can click on "Settings" to obtain more information about them and to set or refuse their use.
aenor aenor
European Regional Development Fund
Book a Demo
Anchor Bottom