Home
Jaltest Telematics
WHERE TO BUY JALTEST?
DIAGNOSTICS
TELEMATICS
ISOBUS
OEM
MILITARY
UNIVERSITY
MY ACCOUNT
Cart
REQUEST INFORMATION
ACCESS TO FLEET
Online Catalog   ONLINE CATALOG

Coverage

FIND OUT ALL OUR COVERAGE
All coverage
What are you looking for?
TRUCK TRAILER BUS LIGHT COMMERCIAL VEHICLE MANUFACTURER
OHW - HEAVY EQUIPMENT OHW - COMPACT EQUIPMENT STATIONARY ENGINE MULTI-PURPOSE VEHICLE

/ AGV / TRACTOR / MERCEDES-BENZ / UNIMOG U200 (WDB405.090)

Fault code reading
Fault code reading
It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time.
Measure Values
These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system.
ECU Data
Vehicle Technical Data
Vehicle Technical Data
Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained.
Vehicle maintenance
Diagnostics warning
Diagnostics warning
Additional actions
Additional actions

Fault code reading: Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading.

Measure Values: It displays on the screen the values of the different sensors connected to the ECU. It depends on each system.

ECU Data: These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system.

Vehicle Technical Data: Technical information of vehicles including all the engine technical data, tightening torques, capacities, graphics and other checking values…

Vehicle maintenance: Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained.

UNIMOG U200 (WDB405.090)

General vehicle information: Technical information of vehicles including all the engine technical data, tightening torques, capacities, graphics and other checking values… Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained.
System Fault code reading Measure Values ECU Data Vehicle maintenance Diagnostics warning Additional actions
Antipollution ACM 3, Exhaust gas treatment system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Antipollution ACM, Exhaust gas treatment system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Brakes ABS/ESP 01T, Antilock braking system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Brakes ABS/ESP 02T, Antilock braking system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Central computer CGW 01T, Gateway It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Central computer CGW 04T, Gateway It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Central computer CPC, Common Powertrain Controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Chassis module PSM, Parameterizable special module It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Compressed air processing EAPU Knorr-Bremse , Electronically Controlled Air Management It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Data registration, telematics and FMS CDS, Vehicle data central unit It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Data registration, telematics and FMS CTP, Telematic module It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Data registration, telematics and FMS TCC, Radio / Navigator It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Data registration, telematics and FMS TP, Fleet Management System It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Electronic module COM 01T, Communication interface It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Electronic module COM 02T, Communication interface It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Electronic module MSF, Switches modular system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Engine MCM, Electronic Diesel Control, Common Rail It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Gearbox TCM ST, Gearbox management system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Hydraulic systems ICM, Power hydraulic system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Hydraulic systems STCU, Systems control unit for off-highway vehicle It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Instrument cluster ICUC, Instrument cluster It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Maintenance MS, Maintenance system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Multiplex MUX1 01B, Multiplex It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Multiplex MUX2 01B, Multiplex It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Multiplex MUX3 01B, Multiplex It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Tachograph TCO, Tachograph It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions
Wheel pressure control TPC, Tyre pressure control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active in the different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyze its behavior over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained. Diagnostics warning Additional actions

ARE YOU INTERESTED IN JALTEST DIAGNOSTICS?

CONTACT COJALI USA INC.
Cojali USA Inc.
2200 N.W. 102 Avenue, #4B
Doral, Florida 33172, USA

TECHNICAL SUPPORT TEAM
+1 305 960 7651
Call for free:
+1 800 975 1865
customersupport@jaltest.com
Facebook X Instagram YouTube Linkedin Threads
Cojali
   Copyright © 2024 Cojali S.L. All rights reserved
COJALI
COMPANY
This page uses our own and third-party cookies to improve the navigability and accessibility of our web site and to optimize the user experience. You can click on "Settings" to obtain more information about them and to set or refuse their use.
aenor aenor
European Regional Development Fund
Book a Demo
Anchor Bottom